Operation
Turn the volume control knob (Volume) and the bass 1.
control knob (Bass) to the lowest level. Set the power
switch on the rear panel of the main unit to the “On”
position. Indicator lights will illuminate.
Adjust the volume control knob (Volume) to the 2.
desired position (clockwise to increase volume,
counter-clockwise to decrease), then adjust the bass
knob (Bass) to your desired tone.
When the system is not in use, turn the Volume and 3.
Bass knobs to the lowest level and switch o the
power.
To avoid damaging the system, please switch o the 4.
power before connecting or disconnecting speakers.
To Next Page
Loading...
Need help?
General
