English
Page 5 Getting Started
Inserting a Memory Card
Use an SD/SDHC memory card to expand your digital
video camera’s available memory. The CAM can ac-
commodate memory cards of up to GB.
Install a memory card by inserting it gently into the
SD card slot on the underside of the video camera.
To remove the memory card, press it further into the
card slot and then release. The card should automati-
cally eject from the slot. Grasp it by the edge and pull
gently to fully remove.
To avoid damage and loss of data, always power
o the video camera before inserting or removing
a memory card.
Be sure that your memory card is unlocked before
inserting it into the video camera.
Do not attempt to place any object other than an
SD memory card into the SD card slot. A compat-
ible memory card should slide easily into the SD
card slot; if you encounter resistance, do not at-
tempt to force the card in.
Turning the Video Camera On/O
Your digital video camera will turn on automatically
when the LCD screen is ipped open, and turn o
when the screen is closed.
When the LCD screen is open, you may also turn the
ca
me
r
a O
/
O
n by pr
essi
ng t
he <POWE
R> b
ut
ton
.
To Next Page
Loading...
Need help?
General
