Operation and maintenance manual PM2 23032021
15
ROAD USE
ATTENTION :
It is imperative that the ball hitch is correctly lockend when using the public
highway
The parts shown below in a red are key SAFETY features. It is essential that the draw bar
locking pin’s position is checked systematically before taking the trailer onto the public highway.
The locking pin (1) locks the draw bar (3) to
the chassis. Check that it is correctly
positioned on either side of the draw bar.
Check that the safety lynchpin is in place.
The locking shackle (2) eliminates any play
between the draw bar and the chassis. Always
ensure that the lock nut is tight before using
the public highway with the trailer.
ATTENTION :
When using the trailer on the road it is essential that the back is unfolded
When the trailer is being used on the road the back of it serves as an underrun protection bar.
When the trailer is empty, it is obligatory to have the back in the lowered position.
When using the road: tighten the two wing nuts (shown below in red) to protect the back of the
trailer from any vibration linked to road use.
To Next Page
Loading...