Cochlear Osia 2 - Overview of the Osia 2 Sound Processor; Device Components Identification

5
Locking the battery door
You can lock the battery door to prevent it from opening accidentally
(tamper-proof). This is recommended when the sound processor is being used
by a child. To lock the battery door, close the battery door completely and
place the Tamperproof tool into the battery door slot. Slide the locking pin up.
To unlock the battery door, place the Tamperproof tool into the battery door
slot. Slide the locking pin down into place.
R L
RL
L
Identification for bilateral users
You can use coloured stickers (red for right, blue for left) to make identifying
left and right processors easier. The identification markers are placed on the
magnet prior to inserting it into the device.
Connecting the programming cable
For programming the Osia 2 Sound Processor a CS45 programming cable
is used. To attach the programming cable, the cover needs to be removed
or replaced with the programming cover. When attaching the programming
cable to the sound processor, align the dot on the cable with the dot on the
programming cover prior to inserting the cable.