English
40
14. Osscora contra-angle handpiece
Reassemble Osscora contra-angle handpiece
u Insert the middle gear into the contra-angle head. Check free
running of the chucking system (a).
v Insert the knee (4 positions are possible) onto the contra-
angle head until it engages.
w Put the shaft in the knee and mind the position of the
rotational lock (b). Check free running rotation (c).
x Press the sheath firmly against the knee and turn until
it engages.
y Attach the spray clip.
Only assemble components with corresponding type
and serial number. Exception: components may be
changed at service or repair - these may have a new
serial number.
u v
w
x
y
c
a
b
To Next Page
Loading...