CoComm F360 - Page 23

USER MANUAL EN
23
there, it will not be necessary to enter the PIN code again, unless the
SIM card is removed and a dierent card is inserted. To turn o the
terminal, press the key [ ] for 3 seconds.
Access the conguration menu
Press the key [ ] for 2 seconds to enter setup mode. Enter the
password using the alphanumeric keyboard and press [ ] to
conrm. In this mode you can congure the terminal based on the
user’s needs, as well as check the signal reception capacity and battery
status. Press the key [ ] to access the main menu and use the arrow
keys. [ ] [ ] to scroll through the dierent options. Press [ ] to
access submenus or select the desired option, or press [ ] to return
to the previous menu.
Adjust call volume
The call volume can be adjusted only during the call. The terminal has
nine volume levels and silent mode. Use the keys [ ] [ ]
to increase or decrease the call volume respectively.
Low Battery Identication/Notication
Connect the power supply when the terminal displays the “Battery
low” message on the screen. You can view the battery charge level
within the terminal conguration mode.