EasyManua.ls Logo

Cocoon HE413002A - Instructions; Installing the Batteries; Turning the Digital Notetaker On;Off; Setting Sound Quality

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
After Sales Support
Telephone: 1300 663 907
Internet: www.winplus.com.au
1. INSTALLING THE BATTERIES
1. Open the battery compartment cover by sliding the cover as shown.
2. Insert the supplied 2 x AAA batteries as marked.
3. Replace the battery cover.
Battery Warnings
- Use only the size and type of batteries specified
- Be sure to correctly install batteries according to the polarity markings on
the battery compartment. Incorrectly installed batteries may cause
damage to the product.
- Do not mix different types of batteries together
(eg. Alkaline and Carbon-Zinc) or old batteries with new.
- Remove batteries when product is not in use for a prolonged period of
time to prevent damage or battery leakage.
- Do not recharge batteries that are non-rechargeable.
Follow manufacturer’s instructions
- Do not remove the batteries while product is in use.
2. TURNING THE DIGITAL NOTETAKER ON/OFF
Hold down the PLAY button for 2 seconds to turn the Digital Notetaker
On/Off.
Note: The LCD display will turn off after 60 seconds without any key being
pressed. The Digital Notetaker will be in standby mode.
3. SETTING SOUND QUALITY
1. When the Digital Notetaker is in standby mode press the HP/LP
REPEAT button to select the sound quality.
2. HP or LP will be shown on the LCD display.
3. For best quality select HP (High Play) with 146hrs recording time
4. For longer recording time select LP (Long Play) with 293hrs
recording time.
Note: By default the Digital Notetaker will be set to HP.
Instructions