Code 3 Sprinter User Manual

CUSTOMIZATION OF THE CONTROL HEAD:
(Pass Code must be entered to make certain program adjustments)
(Pass Code located on page 21. Remove page before giving manual to end user)
Item: Label: Operation: Activation: Description:
BACKLIGHTING ADJUSTMENT:
21. PRESS ALT, Adjusts brightness of keys on Up & Down keys will ash Adjust brightness
THEN controller key pad. by pressing Up or
BACKLIGHT DOWN keys, when
nished press ALT
to save settings or
to exit without
saving press
CLEAR.
SIREN VOLUME ADJUSTMENT:
(Pass code protected adjustment)
22. PRESS ALT, Adjusts volume of siren to t Up & Down keys will ash Adjust volume by
THEN VOLUME situations pressing Up or
Down key, when
nished press ALT
to save settings or
to exit without
saving press
CLEAR.
LIGHT FLASH RATE ADJUSTMENT:
(WHERE APPLICABLE)
23. PRESS ALT, Used to adjust ashing rate of Adjust ash rate by
THEN lights when a general timer is pressing Up or
FREQUENCY used to control ashing rate of DOWN keys, when
lights. nished press ALT
to save settings or
NOTE: ALT, PROGRAM must rst be to exit without sav
changed to use a different function than saving press
toggle. CLEAR.
T56095 Rev. A Page 12 of 22

Code 3 Sprinter Specifications

General

Brand	Code 3
Model	Sprinter
Category	Security Sensors
Language	English