Code Alarm CA 1055 User Manual

12017 Voxx Electronics Corporation. All rights reserved.
PROFESSIONAL
SERIES
Owner’s Guide
For Model:
CA 1055
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
DSSOLFDEOHWRPRVWYHKLFOHV+RZHYHUGXHWRWKHFRQ¿JXUDWLRQRIVRPHYHKLFOHVVRPHIXQFWLRQV$1'25
6$)(7<35(&$87,216PD\QRWDSSO\3OHDVHVHH\RXULQVWDOOLQJGHDOHUIRUPRUHLQIRUPDWLRQ
Vehicle Security and
Keyless Entry System

Code Alarm CA 1055 Specifications

General

Brand	Code Alarm
Model	CA 1055
Category	Remote Starter
Language	English

Summary

Using Your Remote Control

Arming the Security System

How to arm the system, confirming with parking lights flashing twice and doors locking.

Passive Arming Bypass

Temporarily bypass passive arming by pressing the button twice within 5 seconds.

Bypassing The Shock Sensor

Arm the system while ignoring the shock sensor via specific button presses.

Hidden Alarm Function

Arm the system with a silenced siren/horn by pressing the button twice within 3 seconds.

Disarming the Security System

How to disarm the system, confirming with parking lights flashing once and doors unlocking.

Activating Trunk Release Feature (Optional)

Press and hold the button for 3 seconds to open the vehicle's trunk or hatch.

Using the Progressive Car Finder Feature

Press the button to locate the vehicle; parking lights flash and sound plays.

Using the Personal Protection Alarm (Panic)

Press and hold the button for 3 seconds to activate the personal protection alarm.

Valet Mode

Activate/deactivate valet mode by turning ignition ON and pressing the valet button.

User Selectable Notification Chirps

Toggle ARM/DISARM chirps ON or OFF by turning ignition ON/OFF and pressing the valet button 3 times.

User Selectable LED

Control the LED ON/OFF status, accessible via programming or on-the-fly.

Manually Overriding the Security System

Disarm the system without the transmitter by opening a door, turning ignition ON, and pressing the valet button.

Carjack Mode (Anti-Hijack Mode)

Feature must be turned on in programming; triggers siren, flashing lights, and starter kill if activated.

Status LED, Light Flashes, and Siren/Horn Indications

Status LED Flash Indications

Explains LED flash patterns for different system states like Armed, Disarmed, Triggered zones.

Siren/Horn Chirp Indications

Lists chirp patterns for Arm, Disarm, Door Ajar, Car Find, and Triggered events.

Parking Light Flash Indications

Details parking light flash patterns for Disarm, Arm, Door Ajar, Car Find, and Triggered events.

Remote Control Buttons & Functions

Replacing Remote Control Batteries

Guide on how to replace the CR2032 battery in the 4-button remote control.

Limited Lifetime Warranty

Security Trigger Zones

LED Flash Patterns

Explains LED flash patterns for different triggered security zones like Hood/Trunk, Door, Ignition, and Shock Sensor.

Set Up & Programming

Transmitter Programming

Steps to program transmitters into the system using Feature Bank 1.

Manual Feature Programming

Guide to manually program features using Feature Banks 2, 3, or 4 via the valet button.

User Accessible Chirp Control

How to toggle ARM/DISARM chirps ON or OFF without entering programming mode.

User Selectable LED Control

How to control the LED ON/OFF status, accessible via programming or on-the-fly.

Dome Light Delay / Theater Dimming Programming

Programming the system to delay arming for vehicles with dome light delay features.

PC Based Programming & Firmware Updates

Information on programming features and updating firmware using the Code Alarm Utility App.