72017 Voxx Electronics Corporation. All rights reserved.
Remote Control Buttons & Functions
1 Button Transm itterStart Operation Method
Remote Start XPress and Release 2 times
Unlock X
Press and Release 2 times - During
remote start only
Remote Start Shutdown XPress and Hold (3 Sec)
2 / 3 Hour StartX
Ignition On/OFF, Press and Hold Valet
Button, press and release Start 4 times
Replacing Remote Control Batteries
1 Way Remote Control, CAT1B:
The battery (model CR2032) inside each remote control should last approximately 1
year under normal use. When the battery becomes weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate
and the small LED on the remote control will dim. To replace the battery in the remote
control:
1. Unsnap and disassemble the halves of the remote control.
2. Remove the old battery, observing the +/- symbols on the battery
and replace with new CR2032 battery.
3. Reassemble the halves of the remote control.
4. Test operation of the remote control.
To Next Page
Loading...
