CODELOCKS CL5500 Programming And Operating Instructions

24/9/2561 KA-01040 · Customer Self-Service
https://support.codelocks.com/knowledgebase/article/KA-01040/en-us 1/13
Home (/) > Knowledge Base - Home (/knowledgebase/) > KA-01040
CL5500 - Programming and
Operating Instructions
About CL5500
Thisrange of lockscan be operated and managed directlyvia the keypador via a
compatible smartphone by downloading the K3 Connect App.
This Programming and Operating Instructions provides the basics to get you started plus
the full details on how to program and operate the CL5500 range of locks.

The Basics
Master Code
The factory set Master Code is #12345678. This should be changed immediately after installation (Program
01). The Master Code (and Sub-Master Code if set) always start with the # button. This puts the lock in
Programming Mode.
Access Methods
The lock supports a maximumof 350 Clients (users):User Codes (100), User Cards (150)and User
Compatible Phones (100).
Keypad
The lock has a 12 button, back-lit keypad which includes * and # buttons. The # button is only used for
programming. The * button is used in some Programs and with NetCodes.
Code Free
Code Free can be configured via Program04orvia Key-in-Lever by changing the cylinder tailpiece (refer to
Installation Instructions).
Locked/Unlocked Status
By default, when the lock is locked, there is no visual indication. Program08can be used to enable locked
indication.
Views: 866
Print


CODELOCKS CL5500 Specifications

General

Weather Resistance	Yes
Material	Zinc Alloy
Operating Temperature	-20°C to 60°C
Lock Type	Electronic
Battery Type	4 x AA
Code Capacity	100
Door Thickness	35mm - 60mm
Backset	60mm
Operation	Keypad
Power Supply	Battery
Battery Life	12 months
User Capacity	100