CL600 Installation Instructions
Contents
CHECK THAT THE CONTENTS OF YOUR BOX ARE CORRECT
ACCORDING TO THE MODEL
Model
600/605
Model
610/615
Model
620/625
1 Front plate and handle
2 Back plate and handle
3 Neoprene seals x 2
4 RED & BLUE tipped spindles
5 Fixing bolts x 4 (1 x spare)
6 Front plate cylinder cover
7 Allen keys x 2
8 Euro profile cylinder
escutcheons
1 pair - 1 pair
8
a
Keyhole escutcheons 1 pair - -
9 Mortice latch, strike & 4 screws -
-
1
0
2 bolt mortice lock and strike - -
1
1
Double Europrofile cylinder & 3
keys
- -
1
2
Code change keys
1
3
Adaptor kit for mortice locks
with horizontal fixings
- -
1
4
Latch support post -
-
1
5
Code change tool
Installation template
Code change instructions
Code card
Fire Kit (optional) -
(See
page 13)
-
Tools Required for installation:
• Power drill
• Drill bits 30mm (1 / "), 25mm (1"), 20mm ( / "), 16mm ( / ") &
3
16
3
4
5
8
10mm ( / ")
3
8
• Phillips screwdriver
• Chisel - 22mm ( / ")
7
8
• Chisel - 25mm (1")
• Hammer/Mallet
• Stanley knife
• Adhesive tape
• Pencil
• Bradawl
• Tape measure
To Next Page
Need help?
General
