Coelbo SWITCHMATIC 2 - User Manual

1
SWITCHMATIC
SWITCHMATIC 2
ADVANCED SETTINGS
Risk of damaging the pressure assemblies and/or the plant.
Risk by electric shock.
Risk for people and/or objects.

Summary

Advanced Settings

Safety Warnings

Highlights risks of damage, electric shock, and danger to people or objects.

General Information

Technical Characteristics

Lists electrical and physical specifications of the SWITCHMATIC unit.

Hydraulic Installation (Diagram A)

Electric Connection (Diagram B)

Control Panel (Diagram C)

Advanced Menu

Operation Modes (Individual;Master;Slave)

Selects operation mode: conventional pressure switch or master/slave for dual pump systems.

Synchronization Modes

Configures master/slave operation for synchronizing two pumps.

Automatic Reset Function (ART)

Enables or disables the Automatic Restore system (ART) for dry-run recovery.

Minimum Operating Pressure (Dry-Run)

Dry-Run Time Delay

Overcurrent Protection Threshold

Accurate Dry-Run Detection (DR1)

Enables or disables advanced dry-run detection for SWITCHMATIC 2.

Startup Procedure (Diagram C)

Synchronization (Switchmatic 2 Only)

Accurate Dry-Run Detection Procedure

Pressure Sensor Calibration

Zero Regulation Calibration

Full Scale Calibration

Warnings and Alarms

Coelbo SWITCHMATIC 2 Specifications

General

Frequency	50/60 Hz
Maximum current	16 A
Protection grade	IP55
Type	Electronic pressure switch
Material	Plastic
Power supply	230V AC
Pressure range	0.5 to 8 bar
Maximum Load	16A
Range	0.5 - 8 bar