Need help?Do you have a question about the Coelbo SWITCHMATIC and is the answer not in the manual?
General| Maximum current | 16 A |
|---|---|
| Voltage Rating | 230 V |
| Current Rating | 16 A |
| Type | Electronic pressure switch |
| Material | Technopolymer |
Details the SWITCHMATIC as an electronic pressure switch with digital manometer managing pump start/stop.
Specifies the unit's classification according to IEC and EN standards, including pollution degree and voltage.
Covers adjustable pressures, digital gauge, dry-run protection, and fast-cycling alarm.
Instructs on threading the unit to the pump outlet and verifying system readiness.
Provides guidance for qualified personnel on electrical hookup, emphasizing safety and compliance.
Explains the control panel elements: 3-digit display, LED indicators, and push-buttons.
Details the functions and displays for operation, adjustment, alarm, stand-by, and configuration modes.
Lists key specifications including motor power, voltage, pressure ranges, and protection degrees.
Step-by-step guide for initiating the device, including setting current and pressure values.
Explains settings for pressure units, fast-cycling alarm, and stand-by mode activation.
Details advanced settings for operation mode, differential pressure, time delays, and dry-running.
Instructions for synchronizing two units for managing two pumps in cascade.
Procedure to improve dry-running detection accuracy by calibrating the current consumption curve.
Guide for adjusting the pressure sensor calibration for accurate readings.
Lists specific alarm codes (A01-A05) for dry-running, overload, and fast cycling with system reactions.
Declares compliance with European directives and lists relevant standards.
To Next Page
