Need help?Do you have a question about the Cognex DM3812X and is the answer not in the manual?
General| Model | DM3812X |
|---|---|
| Reading Capability | 1D and 2D barcodes |
| Image Sensor | CMOS |
| Image Sensor Resolution | 1280 x 800 pixels |
| Scan Rate | 60 frames per second |
| Enclosure | IP65 |
| Interface | RS-232, USB |
| Mounting | Fixed Mount |
| Light Source | Integrated LED |
| Barcode Types | 1D: Code 39, UPC, EAN, etc. | 2D: Data Matrix, QR Code, etc. |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20° to 60° C (-4° to 140° F) |
| Humidity | 5% to 95% (non-condensing) |
| Type | Fixed-mount barcode reader |
Provides physical dimensions for the DataMan 380 reader and its configurations.
Provides Field of View (FoV) values for 16 mm and 25 mm lenses at various working distances.
Instructions for mounting the DataMan vision system to a surface.
Summarizes various connection options for the DataMan reader.
Guide to connecting the Ethernet cable to the reader and network devices.
Steps for connecting the power and I/O breakout cable to the reader and power supply.
Guide on installing and connecting the DataMan Setup Tool software.
Explains the different trigger modes supported by the DataMan 380 readers.
Methods for triggering the reader using external sources like I/O cables or commands.
General specifications for the DataMan 380 series reader, including inputs, outputs, and power.
Details the image sensor properties, resolution, and shutter speed for different models.
Explains how to configure the optically isolated acquisition trigger input.
Details specifications for high-speed outputs, including voltages and current.
Wiring and pinout information for the Ethernet cable.
Pinout and wiring details for the Power and I/O Breakout cable.
To Next Page
