Need help?Do you have a question about the Cognex DM-280X and is the answer not in the manual?
General| Type | Handheld barcode reader |
|---|---|
| Connectivity | USB, RS-232, Ethernet |
| Reading Range | 50 mm to 300 mm |
| Barcode Types | 1D, 2D |
| Operating Temperature | 0°C to 50°C |
| Image Sensor | CMOS |
| Enclosure | IP65 rated |
| Field of View | Horizontal: 40°; Vertical: 30° |
| Power Supply | 5V DC |
Identifies and describes the physical components and connectors of the DataMan 280 reader.
Provides step-by-step instructions for installing and changing lenses on the DataMan 280.
Guides on setting focus using manual and feedback methods, including best practices.
Summarizes Ethernet, Power/I/O Breakout Cable, and USB connection methods.
Guides the user through the process of installing the DataMan Setup Tool software.
Covers reader training procedures including manual, feedback, and incremental methods.
Instructions on how to clean the exterior housing of the DataMan 280 reader.
Guidance on cleaning the image sensor window to maintain image quality.
Instructions for cleaning the lens cover of the DataMan 280 reader.
To Next Page
