Specifications
The following sections list general specifications for the reader.
DataMan 280 Series Reader
Specification 280
Weight 6.2 mm: 141 g
16 mm: 169 g
Right angle configuration adds 50 g
Power Supply
Options
24 V and PoE (Power over Ethernet)
24 V Supply 24VDC ± 10%
LPS or NEC class 2
Power consumption without USB device attached:
l Average ≤ 5 W using High-Powered Light
l Average ≤ 6 W using High Frequency High-Powered Light
l Peak ≤ 1.6 A using internal illumination
Power over
Ethernet Supply
PoE Class 3
Operating
Temperature
0–40 °C (32–104 °F)
Storage
Temperature
-10–60 °C (14–140 °F)
Humidity <95% non-condensing
Environmental IP67
Note: IP67 rating applies only if you attached all cables properly, or you installed the provided
connector plug. Also make sure that you installed the IP67-rated cover properly.
Shock (Shipping
and Storage)
IEC 60068-2-27: 1000 shocks, semi-sinusoidal, 11g, 10ms
ISTA-1A Standardized Testing - Packaged Products 150lb or less
Vibration
(Shipping and
Storage)
IEC 60068-2-6: vibration test in each of the three main axis for 2 hours @ 10 Gs (10 to 500 Hz at
100m/s2 / 15mm)
FedEx Vibration Testing for packaged products 150 lbs or less
RS-232 RxD, TxD according to TIA/EIA-232-F
Codes 1-D barcodes: Codabar, Code 39, Code 128, Code 93, Code 25, Interleaved 2 of 5, Postal Codes,
UPC/EAN/JAN, MSI
2-D barcodes: Data Matrix (IDMax and IDQuick: ECC 0, 50, 80, 100, 140, and 200), QR Code, PDF
417, AztecCode, DotCode, MaxiCode
High-Speed
Outputs
0, 1, 2, 3
I
MAX
: 50 mA
V
OL
: ≤ ± 3 V @ 50 mA
48
Specifications
To Next Page
