Need help?Do you have a question about the Cognex DataMan 100 and is the answer not in the manual?
General| Model | DataMan 100 |
|---|---|
| Reading Capability | 1D and 2D barcodes |
| Connectivity | USB, RS-232 |
| Image Sensor | CMOS |
| Light Source | LED |
| Dimensions | Varies by model |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Compliance | CE, FCC, RoHS |
| Field of View | Varies by model |
| Operating Temperature | 0 to 50 °C |
| Power Supply | 5 VDC +/- 10% |
| Humidity | 5% to 95% non-condensing |
| Drop Specification | 1.5 m drop to concrete |
| Scan Rate | Varies by model |
| Depth of Field | Varies by model |
| Tilt Angle | ±30° |
| Technology | Image-based |
| Type | Handheld |
Details different DataMan 100 models and their reading capabilities.
Lists optional components and kits for DataMan 100 readers.
Steps for installing the DataMan Setup Tool software on a PC.
Instructions for performing the initial code read and verification.
Common issues and solutions for DataMan 100 reading problems.
Details how to connect the DataMan 100 to a PC via USB.
Explains how to connect the DataMan 100 using an RS-232 serial connection.
Lists physical and operational specifications for the DataMan 100.
To Next Page
