Need help?Do you have a question about the Cognex DataMan 152 X and is the answer not in the manual?
General| Model | DataMan 152X |
|---|---|
| Type | Handheld Barcode Reader |
| Image Sensor | CMOS |
| Resolution | 1280 x 1024 pixels |
| Aiming | Laser aiming |
| Reading Capability | 1D and 2D barcodes |
| Field of View | Varies depending on lens option |
| Depth of Field | Varies depending on lens option |
| Lighting | Integrated LED illumination |
| Communication Interfaces | Ethernet, RS-232, USB |
| Operating Temperature | 0°C to 50°C |
| Enclosure | IP65 rated |
Step-by-step instructions for changing the orientation of the DataMan 150 reader.
Lists the technical specifications for the DataMan 150 reader, including environmental and electrical properties.
Details the specifications of the imager sensors used in the DataMan 150 and 152 series.
Step-by-step guide for installing an optical filter into the reader's optics module.
Instructions for installing the liquid lens accessory onto the DataMan 150 reader.
Guide on how to replace the 6.2 mm lens with a 16 mm lens on the reader.
Explains how to trigger image acquisition using different methods.
Illustrates various wiring configurations for digital inputs on the DataMan 150.
Details wiring diagrams for digital outputs, including NPN and PNP configurations.
Explains how to connect multiple DataMan 150 readers to a single PC in a daisy-chain.
Steps to install the DataMan Setup Tool software on a PC.
Explains how to tune the reader to automatically select optimal reading settings.
Describes methods for external triggering and available trigger modes.
Instructions on how to train the reader with expected symbologies for improved decode yield.
Details how to enable incremental training for multiple symbologies.
To Next Page