6. After each cap nut has been fastened, torque to 0.12 Nm (1.06 in-lb) and reinstall the screw covers.
Note: There are unique left and right screw covers. Take care to attach them correctly.
Dimensions
The DataMan 150 consists of three main parts:
1. Optics module (lens including lens mount, illumination and front cover including filter mounting option for a
Diameter (Ø): 12.3mm<Ø<12.7mm, Thickness (t): 1.6mm<t<2mm filter)
2. Main module, including sensor and CPU
3. I/O module
Dimensional Drawings
The size of the DataMan 150 in the straight configuration is shown in the following figure:
17
Getting Started
To Next Page