Need help?Do you have a question about the Cognex DataMan 150 Series and is the answer not in the manual?
General| Model | DataMan 150 Series |
|---|---|
| Type | Fixed-mount barcode reader |
| Image Sensor | CMOS |
| Resolution | 1280 x 1024 pixels |
| Communication Interface | Ethernet, RS-232, USB |
| Enclosure Rating | IP65 |
| Reading Capability | 1D and 2D barcodes |
| Light Source | LED |
| Aiming Pattern | Crosshair |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Lighting | Integrated |
| Power Supply | 12-24 VDC |
Information on Cognex Corporation's copyright, registered and common trademarks.
Explanation of warning, caution, note, and tip symbols used in the manual.
Overview of the DataMan 150 series readers, their features, and capabilities.
Basic information on configuring and using DataMan 150 readers.
Details on available lens kits and their components for the DataMan 150.
Information on available optical filters for DataMan 150 readers.
Overview of protective lens covers and adaptors for the DataMan 150.
Details on various illumination options compatible with DataMan 150 readers.
Information on available cables for connecting DataMan 150 readers.
Details on the required power supply for the DataMan 150 reader.
Information on mounting brackets for the DataMan 150 reader.
Overview of the DataMan Basic I/O Module for DataMan 150 systems.
Information on the different DataMan 150 system configurations.
Comparison of features across different DataMan 150 model variants.
Details on communication options available for the DataMan 150.
Pinout and color description for the DataMan 150 I/O module cable.
Identification of key features and components on the DataMan 150 reader.
Explanation of the meaning and status indicated by DataMan 150 reader LEDs.
Steps for changing the DataMan 150 reader between in-line and right-angle configurations.
Physical dimensions of the DataMan 150 reader in various configurations.
Comprehensive technical specifications for the DataMan 150 reader.
Specific imager specifications for DataMan 150 and 152 series.
Table showing LED types and their corresponding wavelengths.
Details on exposure times and duty cycles for different illumination options.
Step-by-step guide to install an optical filter in the reader's optics module.
Instructions for installing a liquid lens accessory onto the DataMan 150 reader.
Procedure for changing the 6.2 mm lens mount to a 16 mm lens mount.
Steps to replace the illumination module with a different color.
Guidance on mounting the DataMan 150 reader and right-angle configurations.
Maps and tables detailing FoV and minimum code sizes at various distances.
Specific FoV details for DataMan 150 readers with a 6.2 mm lens.
Specific FoV details for DataMan 150 readers with a 16 mm lens.
Methods for triggering the DataMan 150 reader using external devices.
Pinout and color description for the USB & flying leads I/O cable.
Pinout and color description for the RS-232 & flying leads cable.
Pinout and color description for the flying leads connection cable.
Methods for connecting the DataMan 150 to a PC via USB.
Procedures for connecting the DataMan 150 to a PC using RS-232 serial connection.
Detailed wiring instructions for the DataMan Basic I/O Module.
Diagrams illustrating various digital input configurations for the reader.
Diagrams illustrating digital output configurations (NPN/PNP).
Connecting multiple DataMan 150 readers in a daisy-chain to a single PC.
Step-by-step guide to install the DataMan Setup Tool software on a PC.
Procedure for adjusting the reader's focus for optimal reading performance.
Methods for tuning the DataMan 150 reader for optimal performance.
Explains how to use external triggers and describes various trigger modes supported by the DataMan 150 reader.
How to train the reader to recognize specific symbologies for improved decoding.
Enabling incremental training for multiple symbologies using new images.
Instructions for cleaning the exterior of the DataMan 150 reader.
Guidance on safely cleaning the reader's lens cover to maintain performance.
Important precautions to reduce risk of injury or equipment damage during installation and use.
Compliance details for the DataMan 150 with various international safety and regulatory standards.
To Next Page