Do you have a question about the Cognex DataMan 8050 and is the answer not in the manual?
Outlines the essential steps for connecting and setting up the DataMan 8050 reader.
Provides instructions for downloading and installing the DataMan Setup Tool software.
Step-by-step guide for connecting the DataMan 8050 reader using an RS-232 serial connection.
Step-by-step guide for connecting the DataMan 8050 reader using a USB connection.
Guide to connecting a wireless DataMan 8050 reader to a base station.
Details electrical requirements and connection for base station via RS-232.
Explains the pairing process for DMA-IBASE-BT-XX base stations and readers.
Explains wireless connectivity in ad-hoc mode.
Details how the reader buffers data when out of wireless range.
Explains how to charge the wireless reader and check battery status.
Provides step-by-step instructions for replacing the reader's battery.
Outlines the essential steps for connecting and setting up the DataMan 8050 reader.
Provides instructions for downloading and installing the DataMan Setup Tool software.
Step-by-step guide for connecting the DataMan 8050 reader using an RS-232 serial connection.
Step-by-step guide for connecting the DataMan 8050 reader using a USB connection.
Guide to connecting a wireless DataMan 8050 reader to a base station.
Details electrical requirements and connection for base station via RS-232.
Explains the pairing process for DMA-IBASE-BT-XX base stations and readers.
Explains wireless connectivity in ad-hoc mode.
Details how the reader buffers data when out of wireless range.
Explains how to charge the wireless reader and check battery status.
Provides step-by-step instructions for replacing the reader's battery.
| Type | Handheld |
|---|---|
| Humidity | 5% to 95% (non-condensing) |
| IP Rating | IP65 |
| Scanning Technology | Imager |
| Technology | Laser |
| Connectivity | USB, RS-232 |
| Decode Capabilities | 1D/2D |
| Supported Barcode Types | QR Code, Data Matrix, PDF417, UPC, EAN, Code 128, Code 39 |
| Resolution | 0.005 inches (0.127 mm) |
| Power Supply | 5 V DC |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -40 °C to 70 °C |
| Drop Specification | 1.5 m drop to concrete |
| Dimensions | 160 mm x 80 mm x 60 mm |











