Agency Compliance Statements: DataMan Base Station
The DataMan Base Station meets or exceeds the requirements of all applicable standards organizations for safe
operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them
according to the agency guidelines that follow.
Please read these guidelines carefully before using your device.
Regulator Specification
USA FCC Part 15B, Class A
FCC Part 15.247
Canada ICES-003
European Community EN301 489-1 / -17
EN300 328-2
EN60950
FCC Class A Compliance Statement for the DataMan Base Station
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made to this equipment not expressly approved by Cognex may void the FCC authorization to
operate this equipment.
Canadian Compliance
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
UL and cUL Statement
UL and cUL listed: UL60950-1 2nd ed. and CSA C22.2 No.60950-1 2nd ed.
37
Compliance Information, Warnings and Notices
To Next Page
Loading...
