Wireless Reader: Changing Batteries
To change batteries, perform the following steps:
1. Twist the reader’s end cap, and take it off.
2. Hold the reader in an upright position and the battery will slide out of the handle.
Note: You may need to shake the reader slightly.
CAUTION: The battery used in these devices may present a risk of fire or chemical burn if mistreated. Do
not disassemble, heat above 60ºC (140ºF), or incinerate. Replace battery with Cognex DMA-HHBATTERY-
01 only. The use of another battery may present a risk of fire or explosion.
29
Connection Options
To Next Page
Loading...
