Cognex DM-280X - Training Feedback; Incremental Training for Multiple Symbologies

Training Feedback
The second LED from left on the reader glows green to indicate that it is currently trained. If the reader has no trained
code, the LED is off.
Connect the reader to the DataMan Setup Tool to untrain it and allow it to recognize other enabled symbologies.
Incremental Training for Multiple Symbologies
If you want to train the reader to recognize multiple symbologies, you can present a single image showing all the desired
symbologies and perform the training procedure previously described.
If you cannot present a single image showing all the necessary symbologies, you can enable incremental training under
Training on the Advanced tab of the Code Details pane:
45
Using Your DataMan Reader