To Next PageTo Next PageWhat to do if my CognitiveTPG DLXi is printing blank labels?
If your CognitiveTPG Label Maker is printing blank labels, ensure you are using direct thermal media. If you are printing to thermal transfer media, make sure to use print ribbon.
Why is the ready light red on my CognitiveTPG DLXi?
If the ready light on your CognitiveTPG Label Maker is red, there could be several reasons. First, ensure the printhead is securely latched. Second, check if the printer is out of media or ribbon and replace it if necessary. Finally, if the printer is paused, press the Feed button to continue printing.
General| Print Method | Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Memory | 8 MB Flash, 16 MB SDRAM |
| Display | LCD |
| Maximum Label Width | 4.25 inches |
| Connectivity | USB |
| Media Types | Die-cut labels, Tags |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Weight | 2 kg |
| Supported Label Materials | Paper, Synthetic |
| Print Speed | Up to 5 ips (inches per second) |
| Label Width | 0.5 to 4.25 inches |
