3.
POSITIONING.
- For correct operation of the heater, install it in a vertical position.
- Use the mounting template included in the package. As an example, see template model 14 l / min:
- The fastening elements are in the bag of accessories included in the water heater packaging (wall
plugs for fixing upper and lower fixing screws)
- Hang the water heater of hooks and tighten the screws to attach it to the wall.
- Connect the flexible hot and cold water hoses without forgetting to check for leaks. Do not
remove the filter at the cold water inlet in order to avoid circulation problems.
To Next Page
Loading...
Need help?
General
