40
1. GENERAL FEATURES:
● Glass insulation, water-electrical insulation
The heating element is insulated with high-insulation glass powder; it yields high heat conduction and high
heat stability as filler material, and serves to insulate the heating filament completely from the wall of the tube
as well as ensuring that the insulation is leak-free.
● Multiple protection
This product is fitted with multiple safety features such as automatic constant temperature, anti-overheating,
anti-scorching, anti-power surge, anti-freeze.
● Blue silicon glass container
The enamel pulverization machine, controlled by a computer made in Italy, lays a uniform sheet of special
silicide on the surface of the container, which will melt on the container's steel wall after high-temperature
sintering at 850 ºC, so that the container is completely coated and therefore resistant to impacts, high-pressure
and anti-oxidants, which considerably extends the water heater's useful life.
● Magnesium anode bar.
The unit has a strong magnesium anode bar for protection, anti-corrosion and de-scaling to provide soft water,
which is good for health of one's skin and extends the useful life of the electric heater.
● Smooth operation
With peripheral temperature adjustment and a closed structure, it can supply water to several places at the
same time. This product is suitable for hot water used in the home.
Diagram of the Electric Heater and its Component Parts
Vertical Type
1. Plastic cover plate
2. Smart (intelligent) control
3. Insulation layer
4. Internal tank
5. External cover
6. Magnesium anode
7. Electronic temperature
controller
8. Hot water outlet
9. Cold water intake
10. Heating element
To Next Page
Loading...
Need help?
General
