Cointra TL plus Series User Manual

51
Safety valve
The pressure safety device must be activated on a regular basis (once a month) to eliminate lime scale and
ensure that it is not obstructed. This can be done with lever No. 1, the safety device for draining off water from
the heater (page 46).
To clean the outside of the heater, use a damp cloth with soapy water. Never use abrasive products or those
that contain solvents (for example, alcohol).
For safety reasons, COINTRA GODESIA S.A. accepts no responsibility of any other items are used that
are not original parts or replacements installed by our Technical Support Service.
6. ELECTRICAL INSTALLATION SCHEMATICS

Cointra TL plus Series Specifications

General

Installation	Wall-mounted
Ignition	Electronic ignition
Gas Type	Natural gas / LPG
Energy Efficiency	A
Safety Features	Flame failure device, Overheat protection
Dimensions	Varies depending on model (check specific model datasheet)
Weight	Varies depending on model (check specific model datasheet)