COLBOR BP90 User Manual

Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
BP90
Φ90cm Bowens Para Softbox
User Manual
Installation Instructions
1. Take out the product
2. Installation of Soft Cloth
① Install the internal soft cloth
Velcro
③ Install the grille
3. Installation and Disassembly of Para Softbox
When installing, buckle the handles on both sides with both hands and
lift them vigorously (in the direction shown in the picture).
② Install the external soft cloth
Velcro
Velcro
Caring For Your COLBOR Product
Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
Do not leave the product unattended while in use. Keep out of
reach of children.
The product is not waterproof. Do not handle with wet hands.
Do not attempt to disassemble or modify the product. Doing so
voids warranty.
Please have the product checked or repaired by authorized
technicians if any malfunctions happened.
Malfunction may be caused by dropping, impact of external force.
Failure to follow all the instructions may result in mechanics
damage.
Warranty does not apply to human errors.

COLBOR BP90 Specifications

General

Brand	COLBOR
Model	BP90
Category	Lighting Equipment
Language	English

Summary

Caring For Your COLBOR Product

Installation Instructions

Take out the product

Steps to unpack the product for initial setup.

Installation of Soft Cloth

Instructions for installing the internal soft cloth.

Install the grille

Steps for fitting the grille into the softbox.

Installation and Disassembly of Para Softbox

Procedure for attaching and removing the main para softbox.

Package List

Product Parameter

Warranty Information

Warranty Period

Details the duration and terms of the product's warranty coverage.

Warranty Exclusions and Limitations

Outlines conditions that are not covered by the warranty.

Warranty Claim Procedure

Explains the steps to follow for making a warranty claim.