ALARM LIST
Using the alarm list and diagrams in the appendix for solving problems with the Pelletizer PR750H/350H. When errors
appear comparing and indentify it in the table below. Then go to the appendix at the page which is listed in the table.
Here there will be a flow diagram which will guide through a troubleshooting sequence.
P_Machine.fbW01.foSP_PurgeLimit_2
FB_TwinSAFE_Estop.Emergency_Stop
FB_TwinSAFE_Group.FB_Error
FB_TwinSAFE_Group.Out_Error
FB_TwinSAFE_Estop.Diag_No
FB_Encoder_MTS_IO_Link.State_OP
FB_EL9227_5500_CHx.Tripped
FB_EL2904.Error_Temperature
P_Machine.fbHU01.fbTT1.foSP
P_Machine.fbHU01.fbC1_BL1
Oil level too low / level sensor activated.
FB_W01.Low_Temperature_TT3
FB_W01.Low_CO2_Pressure_TP1