Need help?Do you have a question about the Cold Jet PR750H and is the answer not in the manual?
General| Model | PR750H |
|---|---|
| Category | Industrial Equipment |
| Manufacturer | Cold Jet |
| Type | Dry Ice Blasting Machine |
| Weight | 750 lbs (340 kg) |
| Dry Ice Particle Size | 3 mm |
| Operating Pressure | 20-250 PSI (1.4-17.2 bar) |
| Nozzle Options | Various options available |
Provides an overview of the PR750H Pelletizer's features and capabilities.
Explains the primary function of the PR750H and its operating sequence.
Details how the PR750H system is identified, including machine and serial numbers.
Identifies the responsible supplier for the PR750H equipment.
Covers general safety instructions applicable to the PR750H operation.
Specifies the required qualifications and training for personnel operating the machine.
Addresses security aspects and potential risks associated with the PR750H.
Warns about the hazards of CO2 suffocation and necessary ventilation.
Discusses the risk of electrostatic discharge and preventive measures.
Highlights the risk of frostbite from contact with cold surfaces.
Identifies pinch point hazards present in certain machine areas.
Emphasizes the importance of wearing protective gloves during operation.
Explains the function and activation of the emergency stop system.
Describes built-in safety features and protective measures on the machine.
Provides instructions on handling and responding to liquid CO2 leaks.
Outlines the procedure for safely stopping the production process.
Lists essential daily checks to perform before starting the machine.
Details the Human-Machine Interface screen and its functions.
Explains how to access and adjust set point values for production.
Details the operation and controls available in manual mode.
Details the process and requirements for repairing the PR750H.
Provides a schedule and procedures for routine maintenance tasks.
Explains the conditions and terms of the product warranty.
Instructions for cleaning the PR750H machine.
Steps for safely unpacking and checking for transport damage.
Specifies environmental conditions required for installation and operation.
Provides instructions and safety guidelines for lifting and transporting the unit.
Details floor requirements and necessary clearance for installation.
Outlines site preparation and pre-installation requirements.
Specifies that installation must be performed by qualified technicians.
Provides correct procedures and safety notes for handling the machine.
Details the steps required when the PR750H reaches the end of its service life.
To Next Page
