Cold Jet PR750H - Danger of Congelation Hazards; Pinch Point Hazard Identification; Protective Glove Usage; Safety Operation Procedures

PR750H
User manual
Version: 5
Page: 10 of 21
Date: 2023.05.25
Danger of Congelation
CO
2
in solid form has a temperature of -79°C
/-110°F or lower at atmospheric pressure and can therefore cause serious congelation injuries.
IMPORTANT!
The dry ice is extremely cold, therefore, do not touch parts of the machine, which are in direct contact with the dry ice
without wearing appropriate protective clothing and gloves.
Pinch Point Hazard
If the plexiglass covers in front of the extruder plates are removed, the operator will be exposed to pinch point hazards.
Wear Protective Gloves
While working with the conveyor system, the operator must wear protective gloves to avoid contact with the dry ice or
with parts of the machine which are in direct contact with the dry ice.