PR750H
User manual
Version: 5
Page: 23 of 21
Date: 2023.05.25
The owner is responsible for transmitting the specifications in this publication to other third-party contractors involved in
pre-installation preparations of the site. Failure to properly prepare the site may delay the installation and/or optimal
performance of the pelletizer. The graphics used in this manual may show pelletizer details and installation components
that may be different than what is actually used. Components may have been removed for illustrative purposes or the
continuing improvement of the pelletizer’s design may cause changes that are not included in this publication.
Installation of the PR750H
The installation of the PR750H must be carried out by a Cold Jet service technician, or by a technician approved by Cold
Jet.
DRAWING No. A1
Correct Handling of the PR750H
Min. load capacity of forklift truck: 2000 kg / 4409 lbs.
Min. fork length: 1.5 m
The PR750H is supplied with threaded holes for lifting eyes. Always use the lifting eyes to lift the machine.
To Next Page
Loading...
