Settings
This thermostat also can be used to other application with different setting. It should be set by
professional technicians to avoid damage caused by abnormal settings.
Setting parameter:
1.Time
Set date and week
Note: When Wi-Fi format connect to internet, the date and week will be updated.
Note: Press several times to get back to active display.
2.Temp unit
Change the temperature unit (°C/°F) used in the display.
3.Sensor type
This thermostat can be connected not only to the floor sensor but also to two other commonly
used floor sensors. When replace the old thermostat, there is no need to replace the floor sensor
for easy installation.
No. Senor type Parameters
00 3950(Normal one )
01 3600 R(25°C)=12kΩ R(10°C)=22.2kΩ
02 3700 R(25°C)=10kΩ R(10°C)=19.1kΩ
To do so:
With Active display, press OK button MODE option flashes.
Press
▲or▼ button to
get settings.
Press OK button to confirm.
Time setting:
Get setting. Press▲or▼button to set time.
Press OK button to confirm.
Press▲or▼button to get hour you need.
Press OK button to set minutes.
Press
▲or▼button to get minutes you need.
Press OK button to set week.
Press ▲or▼button to get the day you need.
Press OK button to enter the hour setting of the day
Temp Unit setting:
Get settings. Press
▲or▼button to get °F/°C.
Press OK button to enter.
Press▲or▼button to get the unit.
Press OK button to confirm.
Press OK button to come back to active display
Sensor Type setting:
Get settings. Press
▲or▼button to get Sensor type.
Press OK button to enter.
Press▲or▼button to select sensor type.
Press OK button to confirm.
Press OK button to come back to active display.
To Next Page
Loading...