Need help?Do you have a question about the Coldelite UF-253E Gravity and Pump and is the answer not in the manual?
Detailed steps for removing the freezer from its shipping container and pallet.
Guidelines for selecting an appropriate location, including airflow and leveling requirements.
Information on proper grounding, voltage, and wiring compliance with electrical codes.
Steps to finish installation, including checking motor rotation and reinstalling panels.
Overview of the touch control pads, indicator lights, and monitor display functions.
Explanation of how the dispensing handles control product flow and when to use them.
How photo sensors activate beater motors for product dispensing.
Information on the safety switch and its function when the dispensing head is removed.
Location and basic components of the electrical control panel. Requires authorized technician.
Explanation of refrigeration solenoid valves and high pressure safety switches.
Steps for disassembling gravity feed tubes, splash guards, and regulating sleeves.
Procedure for disassembling mix injection pumps and their components.
Instructions for removing dispensing head retaining knobs, handles, and pistons.
Guide on removing beaters, augers, scraper blades, and idlers.
Washing, rinsing, sanitizing, and air-drying disassembled parts using specific temperatures.
Steps for reassembling beaters, frames, idlers, seals, scraper blades, and bumpers.
Instructions for assembling dispensing head components, pistons, and handles.
Guide to assembling splash guards, orings, regulating sleeves, and feed tubes.
Detailed steps for assembling pump gears, bodies, drive shafts, and suction tubes.
Instructions for filling mix tanks, priming cylinders, and setting up gravity feed tubes.
Steps for priming cylinders, using bleed plungers, and starting pump-fed machines.
How to use Stand-By mode for energy saving and maintaining mix temperature.
Explanation of the gravity feed tube's function as a regulating valve for mix flow.
How to adjust mix injection pump settings for different draw rates and viscosities.
Steps for draining, cleaning tanks, and repeating the process until clear.
Instructions for draining frozen product and cleaning pump-fed machines.
Details on compressor, refrigerant type, pressures, and valve types used in the system.
Specifications for motor type, rotation, amperage, and operating voltage.
Information on overload settings and ranges for motor protection.
Guidance on adjusting proximity switch sensitivity for proper operation.
Common problems, possible causes, and suggested solutions for gravity-fed models.
Common issues, causes, and solutions for pump-fed models.
To Next Page
General
