8-38 Periodic Maintenance and Adjustment
Cable Inspection and Lubrication
POTENTIAL HAZARD
Damaged control cables.
WHAT CAN HAPPEN
Corrosion can result when the outer
covering of control cables becomes
damaged. Cables can also become frayed
or kinked. Operation of controls could be
restricted, which could cause an accident or
injury.
HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace damaged
cables.
Lubricate the inner cables and the cable
ends. If the cables do not operate smoothly,
ask a service center to replace them.
Recommended lubricant:
Engine oil：see page 10-2
Brake Pedal and Accelerator Pedal
Lubrication
Lubricate the pivoting parts.
Recommended lubricant:
Lithium-based grease
(all-purpose grease)
To Next Page
Loading...
