8-46 Periodic Maintenance and Adjustment
Fuse Replacement
The main fuse and the fuse box are located
under the hood. (See pages 8-6 - 8-7 for
hood opening and closing procedures.)
If a fuse is blown, turn off the ignition switch
and install a new fuse of the specified
amperage.
If a fuse is blown, replace it as follows.
1. Remove the battery compartment cover
by lifting it up and pulling it out.
1. Battery compartment cover 2. Screw M6×8
2. Turn the key to “OFF” and turn off the
electrical circuit in question.
CAUTION:
To prevent accidental short-circuiting, turn off
the ignition switch when checking or
replacing a fuse.
To Next Page
Loading...
