Coleman Bayside 9277-151 User Manual

Connect Frame to Tent
–Insert pin into the ends of the main tent poles
at the rear of the tent on either side of the Pet
Den. (illus. 3, illus. 4) Go to opposite end of
pole and gradually apply pressure to the pole
forming an arch until you are able to insert the
pin at the front tent corner, into the pole end.
(works best standing in the open door way,
with two people) Repeat for second pole.
–Insert pin on the side tent into the end of the
main pole running above the front door. Go to
opposite end of pole and gently apply
pressure to the pole forming an arch until you
can insert the side pin into the pole end.
(illus. 3), (illus. 4)
–Insert other side pin into grey side pole end
and gently apply pressure to the pole, forming
an arch until you can insert the pin at the rear
of tent into the pole end. (illus. 4), (illus. 5)
–Insert Pet Den pole into
grommets on the sides
of the Pet Den.
Bayside
™
Family Dome with Pet Den
15’x10’
1
Layout & Positioning
of Tent, Pole Assembly
–Layout and position tent with door facing
desired direction. (illus. 1)
–Unzip door.
–Stake down tent, using the rings on the
stake loops and the corner fabric loops.
Keep the floor taut. (illus. 2)
–Assemble frame poles by interlocking
shock-corded poles. (3 main poles, 2 side
poles, 1 Pet Den pole)
–Insert one main tent pole through the pole
sleeve above the front door. Insert the other
two main poles through the pole sleeves
angling front to back, they will cross each
other. (illus. 1)
–Insert two (Grey) side poles through the pole
sleeves toward the back corners of the tent.
–Insert Pet Den pole through pole sleeve at
rear of tent.
2
When You Are Ready To Set
Up Your Tent
–Select a level campsite clear of
rocks, branches and other hard or
sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions,
position the end of tent into the wind.
Rainfly Pole
Front Door
Side Pole
Side Pole
Pet Den Pole
Assembled black
main tent poles
inserted through
pole sleeves.
Instructions apply to Part Number 9277-151
illus. 1
illus. 2
Tent stake
through ring
on stake loop
illus. 4
Tent frame set-up
illus. 5
Pet Den
Part No. 9277-330
Part No. 9277-360
Main Tent
Poles (Black)
Part No. 9277-350
Side Poles
(Grey)
Pet Den Pole
Part No. 9277-340
illus. 3
Insert pin into
pole end
Rainfly Part No. 9277-370
Side pole
Main pole
Side Pins
Main pole
above door
Pet Den
pole

Coleman Bayside 9277-151 Specifications

General

Brand	Coleman
Model	Bayside 9277-151
Category	Tent
Language	English

Summary

Layout & Positioning of Tent, Pole Assembly

Stake Down Tent

Secure tent using stake loops and corner fabric loops, ensuring the floor remains taut.

Assemble Frame Poles

Interlock shock-corded poles: 3 main poles, 2 side poles, and 1 Pet Den pole.

Insert Main Tent Poles

Thread one main pole above front door and two others angling front to back.

Insert Side and Pet Den Poles

Thread grey side poles towards back corners and Pet Den pole at rear.

Connect Frame to Tent

Connect Main Tent Poles

Insert pins at rear tent corners into main poles, then arch and connect to front corners.

Connect Side Tent Poles

Insert side pins into grey side poles, arching to connect to rear tent pole ends.

Connect Pet Den Pole

Insert Pet Den pole into grommets on the sides of the Pet Den.

Attach Tent to Frame Using Frame Clips

Attach Frame Clips

Clip frame clips along tent edges to the frame poles and adjust corner stakes.

Attach Rainfly

Assemble and Position Rainfly

Assemble rainfly pole, thread through sleeve, and drape over tent frame.

Connect Rainfly Loops

Attach eight elastic loops with hooks to fabric loops on frame clips.

Secure Rainfly Attachments

Insert rainfly pole tips into front tent grommets and secure underside attachments.

Stake Out Guy Lines

Attach and stake out four guy lines at the front and rear of the tent.