3. Using Your CamĞƌĂ
3.1.12 Time & Date
This function allows you to set the current Date and Time on the camera.
1. In the Settings Menu use the LEFT or RIGHT buttons to select ‘Time &
Date’ and press the OK button to enter the ‘Time & Date’ submenu.
2. Press the LEFT or RIGHT buttons to navigate the menu and press the
OK button to confirm your selected setting (Set Time & Date, Time
Format, Date Format).
3. To set the current date and time select ‘Set Time & Date’ and press the
OK button to enter the ‘Set Date & Time’ submenu.
4. Use the LEFT or RIGHT buttons to change the highlighted field, press
the OK button to go to the next field.
5. When the date and time are set press the OK button to return to the
‘Time & Date’ menu.
6. To set the Time Format use the LEFT or RIGHT buttons in the ‘Time &
Date’ menu to select ‘Time Format’ then press the OK button to enter
the ‘Time Format’ submenu.
7. Press the LEFT or RIGHT buttons to navigate the menu and press the
OK button to confirm your selected setting (24h, 12h).
8. To set the Date Format use the LEFT or RIGHT buttons in the ‘Time &
Date’ menu to select ‘Date Format’ then press the OK button to enter the
‘Date Format’ submenu.
9. Press the LEFT or RIGHT buttons to navigate the menu and press the
OK button to confirm your selected setting (dd/mm/yyyy, yyyy/mm/dd,
mm/dd/yyyy).
10. Press the MENU button to exit the ‘Time & Date’ menu.
3.1.13 Photo Stamp
This function adds a date/time stamp to your photographs.
1. In the Settings Menu use the LEFT or RIGHT buttons to select ‘Photo
Stamp’ and press the OK button to enter the ‘Photo Stamp’ submenu.
2. Press the LEFT or RIGHT buttons to navigate the menu and press the
OK button for your selected setting (Time & Date, Date, Off).
Note that once a date/time stamp is captured on a photograph, it
cannot be removed.
3.1.14 Password Protection
This function allows you to set a 4 digit password to access the camera
when turning it on.
1. In the Settings Menu use the LEFT or RIGHT buttons to select
To Next Page
Loading...