To Next PageTo Next Page
Need help?Do you have a question about the Coleman CM01213-15 and is the answer not in the manual?
General| Brand | Coleman |
|---|---|
| Model | CM01213-15 |
| Category | Air Compressor |
| Language | English |
Warns against spraying flammables in confined areas due to sparks from the motor.
Advises against outdoor use in wet conditions and requires licensed electrician for wiring.
Warns about tank rust weakening, advises draining water, and prohibits welding/drilling.
Emphasizes shutting off power, bleeding pressure, and keeping shrouds on for safety.
Stresses not exceeding max pressure rating and relieving pressure before connections.
Warns about hot pump/manifold, advises cooling before servicing, and keeping children away.
Recommends respirators for toxic materials and avoiding direct inhalation of compressed air.
Mandates safety goggles and warns against pointing nozzles at people.
Includes daily relief valve checks, maintaining clearance, cord protection, and hearing protection.
Powers the pump, includes thermal overload protection and automatic reset.
Compresses air using a piston and cylinder, discharging it into the tank.
Starts/stops the motor based on tank pressure, must be set to OFF when not in use.
Prevents system overpressure by automatically opening or via manual pull.
Adjusts line pressure for tools; turn clockwise to increase, counterclockwise to decrease.
Measures stored air pressure in the tank; not adjustable by operator.
Measures the pressure at the outlet, adjusted by the regulator.
Port for connecting a 1/4" NPT air hose.
Removes moisture from the tank after shutdown; warning about pressure > 10 PSI.
Stores the compressed air.
For 120V circuit, requires grounding; use correct plug configuration.
Instructions for adding oil, breaking in the pump, and initial cycle.
Steps for starting the compressor after initial setup, including oil level and regulator adjustment.
Procedures for safely turning off the compressor, unplugging, and releasing pressure.
Diagram showing the assembly of compressor parts with labels.
