Coleman Eagle Rock 9277C957 User Manual

Connect Frame to Tent
–Insert one pin into the end of main tent
pole at tent corner. (illus. 3, illus. 4)
–Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the pole end.
–Repeat for second pole.
–Insert pin into the end of side pole, go to
opposite end of pole and apply pressure
until you arch the pole and can insert the
pin into the pole. (illus. 3, illus. 4)
–Repeat for other side pole.
–Tie top frame tie. (illus. 5)
Eagle Rock
™
9’6”x7’
1
Layout & Positioning
of Tent, Pole Assembly
–Layout and position tent with door
facing desired direction. (illus. 1)
–Unzip door.
–Stake down tent corners only, using the
stake loops. Keep the floor taut.
(Intermediate loops will be staked later.)
–Assemble frame poles by interlocking
shock-corded poles. (four poles)
–Insert the poles into pole sleeves.The
longer black poles should cross forming
an “X” in the middle of tent. The shorter
side gray poles insert into sleeves
running front to back. (illus. 1)
2
When You Are Ready To
Set Up Your Tent
–Select a level campsite clear
of rocks, branches and other
hard or sharp objects.
–Do not set up your tent
under trees.
–For best results in windy
conditions position the end
of tent into the wind.
Part No. 9277C950
Front Door
Side Poles
Assembled
poles
inserted
through
pole
sleeves
Instructions apply to Part Number 9277C957
illus. 1
illus. 2
Tent stake
through ring
on stake loop
illus. 4
Tent frame
set-up
Part No. 9277B953
Part No. 9277B952
illus.3
Insert pin into pole end
illus. 5
Frame Tie
Rainfly
Part No. 9277C951
Main Tent Poles
Side Poles
Rainfly Pole

Coleman Eagle Rock 9277C957 Specifications

General

Brand	Coleman
Model	Eagle Rock 9277C957
Category	Tent
Language	English

Summary

Tent Setup and Pole Assembly

Tent Layout and Positioning

Position the tent with the door facing the desired direction and stake down corners.

Assemble and Insert Frame Poles

Interlock shock-corded poles and insert them into the tent sleeves.

Connect Tent Frame to Tent

Insert Tent Pole Pins

Insert pins into tent pole ends and arch poles to connect to opposite ends.

Attach Frame Clips

Attach frame clips along tent edges to the frame poles for secure connection.

Attach Rainfly

Assemble and Insert Rainfly Poles

Assemble rainfly poles and insert them through sleeves on the underside of the rainfly.

Connect Rainfly to Tent Frame

Drape rainfly over frame, connect elastic loops with S-hooks, and insert pole tips.

Secure Rainfly

Secure rainfly using hook & loop fasteners, ties, and stake out guylines.

Important Usage and Safety Information

Condensation Management

Minimize condensation by ensuring good ventilation and removing wet items.

Tent Care and Storage

Dry tent thoroughly before storage; do not leave poles telescoped.

Flame and Heat Source Warning

Keep all flame and heat sources away from tent fabric for safety.