Coleman Exponent oryx 2 User Manual

Place tent with doors facing the desired direction, or into the wind for best results.

Interlock shock-corded sections to create two long frame poles.

Lay poles diagonally across the tent, crossing in the center to form an 'X'.

Fasten the Toggle & Loop on the tent top over both poles.

Insert one pole tip into the tent corner grommet.

Apply pressure to the pole to form an arch and insert the opposite tip into the grommet.

Secure frame clips to the mesh vent on the pole.

Secure remaining frame clips along the tent edges to the frame poles.

Make necessary adjustments to the tent corner stakes for proper tension.

Interlock shock-corded sections to assemble the rainfly pole.

Place rainfly pole into reinforced pockets on the underside of the rainfly.

Drape rainfly over tent, securing it with frame ties and connecting corner clips.

Connect guy lines to fabric loops and stake them out for stability.

Understand condensation formation and how to minimize it through ventilation.

Advise on the necessity and availability of seam sealer for waterproofing.

Instructions for proper drying and storage to prevent damage and mildew.

Proper methods for removing stakes and storing tent poles.