Do you have a question about the Coleman EB23C and is the answer not in the manual?
Essential safety requirements and adherence to national/local codes for furnace installation and operation.
Lists applicable codes and standards required for furnace installation and compliance.
Guidance on selecting an appropriate installation location, prioritizing servicing and accessibility.
Specifies minimum required clearances around the furnace for safe operation, maintenance, and airflow.
Details selection and installation of the 7900 Series duct connector for furnace-to-duct connection.
Step-by-step instructions for the proper installation of the screw-attachment type duct connector.
Step-by-step instructions for the proper installation of the tab-attachment type duct connector.
Procedures for physically mounting the furnace unit onto the duct connector and securing it in place.
Instructions provided for converting the furnace from its standard downflow to an upflow configuration.
Diagrams and instructions illustrating thermostat wiring for heating, cooling, and condenser unit connections.
Information on accessory blower packages for enhanced cooling and heat pump performance up to specific tonnage.
Essential safety requirements and adherence to national/local codes for furnace installation and operation.
Lists applicable codes and standards required for furnace installation and compliance.
Guidance on selecting an appropriate installation location, prioritizing servicing and accessibility.
Specifies minimum required clearances around the furnace for safe operation, maintenance, and airflow.
Details selection and installation of the 7900 Series duct connector for furnace-to-duct connection.
Step-by-step instructions for the proper installation of the screw-attachment type duct connector.
Step-by-step instructions for the proper installation of the tab-attachment type duct connector.
Procedures for physically mounting the furnace unit onto the duct connector and securing it in place.
Instructions provided for converting the furnace from its standard downflow to an upflow configuration.
Diagrams and instructions illustrating thermostat wiring for heating, cooling, and condenser unit connections.
Information on accessory blower packages for enhanced cooling and heat pump performance up to specific tonnage.
| Model | EB23C |
|---|---|
| Heating Capacity | 23, 000 BTU |
| Efficiency Rating | 80% AFUE |
| Blower Type | Multi-Speed |
| Ignition Type | Direct Spark Ignition |
| Heat Exchanger Material | Aluminized Steel |
| Fuel Type | Natural Gas/Propane |
| Input BTU | 23, 000 BTU |
Loading...