Coleman Echelon FC9V User Manual

TECHNICAL GUIDE
Echelon
MODELS: FC9V
GAS-FIRED
CONDENSING / HIGH EFFICIENCY
DOWNFLOW/HORIZONTAL
TWO STAGE VARIABLE SPEED FURNACES
NATURAL GAS
60 - 120 MBH INPUT
Due to continuous product improvement,
specifications are subject to change without notice.
Visit us on the web at www.york.com for the most
up-to-date technical information.
Additional rating information can be found at
www.gamanet.org.
EFFICIENCY
RATING
CERTIFIED
ISO 9001
Certified Quality
Management System
246786-CTG-B-0407
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
These Category IV, highly efficient, compact, condensing
type furnaces are designed for residential and commercial
installations in a basement, closet, alcove, recreation room or
garage where the ambient temperature is above 32°F, or
higher. They may be either side wall or thru-roof vented using
approved plastic type combustion air and vent piping. All
units are factory assembled, wired and tested to assure
dependable and economical installation and operation.
WARRANTY
Lifetime limited warranty on both heat exchangers to the orig-
inal purchaser; a 20-year limited warranty from original instal-
lation date to subsequent purchaser.
10-year warranty on the heat exchanger in commercial appli-
cations.
5-year limited parts warranty.
FEATURES
• Two stage heating operation includes:
- Two stage gas valve
- Two stage inducer operation
• Provides increased comfort level & very quiet unit opera-
tion
• Adjustable delay timer allows two stage operation with sin-
gle stage thermostat
• Compact, easy to install, ideal height 40" cabinet
• Blower-off delay for cooling SEER improvement.
• Easy to connect power/control wiring.
• Built-in, high level self diagnostics with fault code display.
• Low unit amp requirement for easy replacement application.
• Integrated control module for reliable, economical operation.
• May be installed as either two-pipe (sealed combustion) or
single pipe vent (using indoor combustion air)
• Top intake & vent connection allows installation in narrow
locations.
• Electronic Hot Surface Ignition saves fuel cost with increased
dependability and reliability.
• Induced combustion system with inshot main burners for
quiet, efficient operation.
• No special vent termination kit required.
• 100% shut off main gas valve for extra safety.
• 24V, 40 VA control transformer and blower relay supplied for
add-on cooling.
• Hi-tech tubular aluminized steel primary heat exchanger.
• Secondary (condensing) heat exchanger of 29-4C high-grade
stainless steel.
• Timed on, adjustable off blower capability for maximum com-
fort.
• Independent door removal for greater durabilty and ease of
access.
• Easy access from front of unit for cleaning, maintenance or
service.
• Protection from intake, exhaust or condensate blockage.
• Insulated blower compartment for quiet operation.
• 3-way transition facilitates fresh air piping.
•
EcoTrak comfort system allows dealer to customize comfort
settings based on regional location.

Coleman Echelon FC9V Specifications

General

Brand	Coleman
Model	Echelon FC9V
Category	Furnace
Language	English

Summary

Product Overview and Features

DESCRIPTION

Details Category IV condensing furnaces for residential and commercial use above 32°F.

WARRANTY

Covers lifetime limited warranty on heat exchangers and 5-year limited parts warranty.

FEATURES

Highlights two-stage operation, quiet performance, diagnostics, and advanced heat exchangers.

Dimensions and Performance Data

DIMENSIONS

Cabinet dimensions (A, B, C, D, E) listed for various furnace models.

ELECTRICAL AND PERFORMANCE DATA

Tables include input/output, airflow, AFUE ratings, and operating weight.

Air Flow Data Tables

COOLING AND HEAT PUMP CFM

CFM data for cooling/heat pump modes based on speed and jumper settings.

HEATING CFM

CFM data for heating modes based on speed and jumper settings.

Filter and Clearance Specifications

FILTER PERFORMANCE

Blower performance without filters and typical pressure drop for various filter types.

SYSTEM AIRFLOW WITH FILTERS

Procedure to determine system airflow, incorporating filter pressure drop.

UNIT CLEARANCES TO COMBUSTIBLES

Required clearances for downflow and horizontal applications to combustible materials.

AC Thermostat Wiring Connections

AC10 2 Stage Scroll A/C w/ Variable Speed Furnace

Wiring diagram for AC systems with variable speed furnaces and specific thermostats.

Heat Pump Thermostat Wiring Connections

HP24 Two Stage H/P - H*5B, YZE - w/Variable 2 Stage Furnace

Wiring diagram for heat pump systems with variable speed furnaces and specific thermostats.

Optional Accessories and Kits

PROPANE (LP) CONVERSION KIT

Accessory kit for converting natural gas units to propane operation.

VENT TERMINATION KITS

Kits for rooftop/sidewall venting, allowing common pipe for air and exhaust.

FLOOR BASE & COIL TRANSITION KITS

Optional bases for combustible floors and transition kits for specific coil installations.

CONDENSATE NEUTRALIZER KIT

Kit to neutralize acidic condensate, including cartridge and media.

HIGH ALTITUDE PRESSURE SWITCHES

Pressure switches required for installations above 8,000 feet altitude.

COMPATIBLE ROOM THERMOSTATS

Selection of compatible thermostats offering optimum performance and features.