To Next PageTo Next Page
Need help?Do you have a question about the Coleman FAST PITCH VALDES 4 and is the answer not in the manual?
Prepare a flat, clear area free from hazards for tent setup.
Unpack tent, identify parts, lay flat, and peg corners for initial shape.
Understand valve types, open/close, connect pump, and inflate to correct pressure.
Safely disconnect pump and close valve cover after inflation.
Assemble fiberglass poles and insert them into corresponding sleeves and connectors.
Install specific poles for hinged doors, securing with zippers.
Adjust corner pegs and secure all guy lines for tent stability.
Check for leaks and be aware of pressure changes due to temperature.
Open valve, push pin to deflate air poles completely.
Roll tent to expel air, fold, and pack with pegs and poles, ensuring dryness.
Store tent in a dry, cool, ventilated, dark area away from direct sunlight.
Clean with water and soft sponge; avoid detergents and insecticides.
Deflate, remove bladder, locate puncture, clean, apply patch, and reassemble.
Check repair efficacy, reassemble, and contact service for unrepairable damage.
General