Coleman Instant shelter User Manual

SHEET 1 OF 1
Wichita, Kansas USA 67219
The Coleman Company, Inc.
COMPOSITE- NO
CRITICAL DIMENSION
cm3
REV.
MATERIAL:
SEE NOTES
SEE NOTES
1:1
16-OCT-13
Black
Program: InDesign CS6
Rainy X ID
01
4010030945
SCALE:
NAME:
DATE: DRAWN BY: APPROVED BY: REVISION
FINISH
SPEC.:
DATE
NAME
ECN NO.
MODIFICATIONS
grams
g/cm3
This drawing contains proprietary information and trade secrets of The Coleman Company, Inc.
Unauthorized use or copying is prohibited.
METRIC
[INCH]
CHECKING IS COMPULSORY
VOLUME
01 16-OCT-13 Rainy X 20032608NEW
MASS
DENSITY
GENERAL TOLERANCES
EXCEPT AS NOTED
0 TO 6mm = ±0.1
>6 TO 30mm = ±0.2
>30 TO 80mm = ±0.3
>80 TO 180mm = ±0.4
>180mm = ±0.5
ANGULAR = ± 3°
PAR T
NO.:
DO NOT PRINT THIS PAGE
Printing Notes:
Material: White washable and tear resistant non-woven
fabric, such as Tyvek.
Ink: Black
Resolution: 150 DPI or above
Printing method: Offset Printing
Size: 8.27 x 11.69 (A4) in (W x H)
Instruction Sheet for Instant Shelter

Coleman Instant shelter Specifications

General

Frame Material	Steel
Pole Material	Steel
Setup Time	60 seconds
Material	Polyester
Type	Instant
Ventilation	Vented roof

Summary

Shelter Setup Steps

Extend the Shelter Frame

Instructions for unfolding the shelter frame, including tips for easier setup.

Set up the Shelter

Steps for erecting vent supports, draping the shelter top, and attaching fasteners.

Adjust the Height

Guide to adjusting the shelter's height, ensuring all posts are level.

Stake the Shelter

Instructions on how to secure the shelter using stakes in the frame posts.

Secure the Guylines

Procedure for attaching and staking the guylines to secure the shelter.

Shelter Storage and Care

Disassembly

Steps for safely taking down the shelter, including frame collapse and storage.

To Store

Guidelines for storing the shelter components clean, dry, and protected.

Things You Should Know

Important information on condensation, fabric care, and usage warnings.