Coleman PCG4A36 - User Manual

TECHNICAL GUIDE
SINGLE PACKAGE
AIR CONDITIONER / GAS HEAT
14 SEER – R-410A – 3 PHASE
3 THRU 5 NOMINAL TONS - 208/230V
50 THRU 125 MBH HEAT INPUT
MODELS: PCG4*36 THRU 60
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.upgnet.com and www.colemanac.com
Additional rating information can be found at:
www.ahridirectory.org
WARRANTY SUMMARY*
Standard 1-Year limited parts warranty.
Standard 5-Years limited compressor warranty.
Lifetime gas heat exchanger warranty with registration.
See limited warranty certificate in User’s Information Manual for details.
®
5564041-CTG-A-1018
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
These packaged cooling/heating air conditioners are designed
for outdoor installation. Only utility and duct connections are
required at the point of installation.
FEATURES
• Operating Efficiency - All PCG4 model gas units provide a
minimum AFUE of 81.0% in heating and 14.0 SEER, 11.0
EER rating for cooling operation. All models meet California
Low-Nox requirements of 40 ng/joule emission level for Air
Quality Management Districts.
• On Site Flexibility - All model sizes use a compact design
cabinet in one of two footprints. This provides installer flexi-
bility for placing the proper capacity unit on curbs or pads
with the smallest footprint after the internal load has been
determined. Field convertible duct connections from side
shot to down shot allows the installer to have greater flexibil-
ity with less inventory.
• Lower Installation Cost - Installation time and costs are
reduced by easy power and control wiring connections. The
small base dimension means less space is required on the
ground or roof. All units are completely wired, charged with
R-410A and tested prior to shipment. Test stations using a
state-of-the-art computerized process system are used to
insure product quality. Refrigerant charge and component
part numbers are verified via computers during assembly.
Vital run test statistics such as system pressure, motor cur-
rents, air velocity and temperature, unit vibration, and gas
system safeties are monitored and recorded by the system to
insure unit performance. Equal size side supply and return
duct connections allow easy connection of ducts to match
low crawl spaces without transition pieces.
• Utility Connections Made Easy - Gas and electric utility
access provided through the bottom or the side of the unit.
Utility connections can be made quickly and with a minimum
amount of field labor. A field supplied and field installed elec-
trical disconnect switch must be installed.
• Convertible Airflow Design - The bottom duct openings are
covered when they leave the factory, ready to be used for a
side supply/side return application. If a bottom supply/bottom
return application is desired, simply remove the two panels
from the bottom of the unit and place them in the side supply/
side return duct openings. No panel cutting is required and
no accessory panel is necessary. Convertible airflow design
allows maximum field flexibility and minimum inventory.
• Condensate Pan - A corrosion-resistant, long-lasting, water-
tight pan is positioned below the evaporator coil to collect
and drain all condensate, preventing build-up of stagnant
condensate. The condensate pan conforms to ASHRAE 62-
89 standards (Ventilation for Acceptable Indoor Air Quality).
• Condensate Drain - The 3/4 inch NPT female connection is
rigidly mounted to assure proper fit and leak tight seal.
• Durable Finish - The cabinet is made of G90 galvanized
steel with a powder paint coating for appearance and protec-
tion. The pre-treated galvanized steel provides a better paint-
to-steel bond, which resists corrosion and rust creep. Pow-
der paint finish insure less fading when exposed to sunlight,
and provides superior corrosion resistance (1000 hour salt
spray tested).
Continued on next page.

Summary

Key Features of Coleman PCG4 Series

Energy Efficiency and Compliance

Highlights minimum AFUE, SEER, EER ratings and California Low-Nox requirements.

On-Site Flexibility and Ducting

Covers compact design, field convertible duct connections for side/down shot.

Installation Ease and Wiring

Details easy power/control wiring, small base dimensions, and factory testing.

Convenient Utility Connections

Convertible Airflow Design

Describes how bottom duct openings are convertible for side supply/return.

Available Unit Accessories

Economizer and Sensor Kits

General Unit Specifications

Manufacturing Standards and Certifications

Details ISO 9001 certification, outdoor installation design, and gas/electric capabilities.

Unit Cabinet Design and Materials

Describes G-90 galvanized steel, single-piece top, insulation, and base pan.

Indoor Blower Motor and Fan

Outdoor Fan Motor and Blades

Refrigerant System Components

Details compressors, coils (indoor/outdoor), TXVs, and filter/strainer.

Gas Heating System Details

Describes heat exchanger, burners, induced draft, and safety controls.

Physical and Performance Data

AHRI Cooling Performance Metrics

Lists nominal tonnage, gross/net capacity, EER, SEER, CFM, and system power.

Refrigerant Type and Charge

AHRI Gas Heat Performance Metrics

Details heating model, input/output, AFUE, number of burners/stages.

Compressor and Coil Specifications

Provides compressor type, outdoor/indoor coil face area, rows, fins, tube diameter.

Fan and Motor Specifications

Sound Performance Data

Sound Ratings by Octave Band Frequency

Electrical Data and Requirements

Compressor and Fan Motor Amperage Values

Details RLA, LRA, MCC, FLA for compressor and fans, and MCA for motors.

Maximum Fuse or Breaker Size

Side Duct Airflow Performance

Airflow vs. Static Pressure (Side Duct)

Presents SCFM vs. static pressure for side duct applications by motor speed.

Bottom Duct Airflow Performance

Airflow vs. Static Pressure (Bottom Duct)

Presents SCFM vs. static pressure for bottom duct applications by motor speed.

Coleman PCG4A36 Specifications

General

Brand	Coleman
Model	PCG4A36
Category	Air Conditioner
Power Supply	208/230V
Cooling Capacity	36000 BTU
Refrigerant	R410A