Coleman TH4B4223S - User Manual

5523951-CTG-J-0620
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
LX SERIES
SPLIT SYSTEM
HEAT PUMPS
14 SEER – R-410A – 1 PHASE
1.5 THRU 5 NOMINAL TONS
MODELS: TH4B18 THRU 60
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at
www.simplygettingthejobdone.com and
www.colemanac.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Extended 10-Years limited parts warranty.
Standard 10-year limited compressor warranty.
Extended 10-Years limited parts warranty requires
online registration within 90 days of purchase for replacement
or closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.
FOR INSTALLATION IN ALL US REGIONS AND CANADA
Installation Allowed
®
DESCRIPTION
The TH4 model outdoor units are optimized for the 14 SEER /
8.2 HSPF Minimum Efficiency in all US Regions, and are spe-
cifically designed to be matched with Coleman indoor coils, fur-
naces, and air handlers to provide a complete system solution.
FEATURES
• Easier Installation - Independent panels provide quick
access for unit setup. Installation time is reduced by easy
power and control wiring access. The factory installed filter-
drier and factory charge for a 15-Ft lineset means less time
spent brazing and charging the system. The small base
dimension and reduced unit size make for easier retrofits.
• Accessible Information - QR code on unit provides quick
access to technical documents and warranty information.
• Durable Finish - The coated steel wire fan guard, coated
external fasteners, and pre-treated G90-equivalent galva-
nized steel chassis components resist corrosion and rust
creep. Titanium colored powdercoat paint further protects
external panels.
• Rugged Coil Protection - Coils are protected from mechan-
ical damage by a proven stamped steel coil guard design.
• Quality Coils - Enhanced aluminum fins are mechanically
bonded to copper tubing.
• Protected Compressor - Compressors are protected inter-
nally by a high pressure relief valve and a temperature sen-
sor, and externally by the system high and low pressure
switches. The liquid line stainless steel filter-drier is factory
installed to protect the compressor against moisture and
debris.
• Reliable Operation - Ball bearing fan motors provide supe-
rior performance in extreme temperatures. Factory installed
accumulator ensures proper functioning across a wide range
of conditions.
• Environmentally Friendly - CFC-free R-410A refrigerant
delivers environmentally friendly performance with zero
ozone depletion.
• Top Discharge - Air is blown up, away from the structure
and any landscaping and allows compact location on multi-
unit applications.
• Low Operating Sound Levels - Developed using CFD and
FEA tools, the sturdy cabinet and top design provides sound
performance of 75 dBA or lower. Compatible accessories for
further sound reduction are also available.
• Better Service Access - Diagonal base valves with open
access for low-loss fittings, single panel access to the electri-
cal controls, full corner access, and removable fan guard
allow easy access for unit maintenance.
• Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.

Summary

TECHNICAL GUIDE

DESCRIPTION

Describes the TH4 model outdoor units optimized for 14 SEER / 8.2 HSPF minimum efficiency.

FEATURES

Highlights key features like easier installation, durable finish, protected compressor, low operating sound, and better service access.

PHYSICAL AND ELECTRICAL DATA

DIMENSIONS

SYSTEM CHARGE FOR VARIOUS MATCHED SYSTEMS

CHARGING PROCEDURES

Outlines the step-by-step procedures for charging the refrigerant system.

SYSTEM CAPACITY - With High Efficiency Motor Furnaces

HEATING PERFORMANCE DATA

Provides heating capacity data: NET MBH, HSPF (Region IV and V), and COP.

APPLICATION & ACCESSORIES

Standard Application Limits

Specifies limits for lineset length and outdoor ambient temperatures for optimal operation.

Non-Standard Lineset Applications

Refers to guidelines for installations with reduced diameter or long linesets.

MECHANICAL SPECIFICATIONS

MANUFACTURE AND CERTIFICATIONS

Details manufacturing standards, CSA/UL certifications, performance ratings, sound testing, and US assembly.

UNIT APPLICATION

Specifies operating limits for cooling, heating, linesets, wall mounting, and wind force.

UNIT ACCESS

Describes access points for maintenance: removable fan guard, coil guards, electrical compartment, and blockoff panels.

UNIT CONSTRUCTION

Details unit construction features: factory wired/piped, G90 steel, powder-coat finish, coil guards, filter-drier, base valves, and high-pressure switch.

UNIT COMPONENTS

Describes compressor type, vibration isolation, fan motor, and coil construction.

UNIT WARRANTIES

Outlines the 10-year compressor and 5-year parts warranty.

TYPICAL INSTALLATION

PERFORMANCE DATA - 1.5 TON

CONDENSER-ONLY DATA (OUTDOOR UNIT)

Provides performance data for the outdoor unit only, at various ambient conditions.

COOLING PERFORMANCE DATA

Presents cooling performance data for the specified air conditioner model with different indoor coil options.

HEATING PERFORMANCE DATA

PERFORMANCE DATA - 2 TON

PERFORMANCE DATA - 2.5 TON

PERFORMANCE DATA - 3.5 TON

PERFORMANCE DATA - 4 TON

Condenser-Only Data (Outdoor Unit)

Provides performance data for the outdoor unit only, at various ambient conditions.

Cooling Performance Data

Presents cooling performance data for the specified air conditioner model with different indoor coil options.

Multipliers for determining the performance with other indoor sections.

Provides multipliers to adjust performance for different indoor sections.

Coleman TH4B4223S Specifications

General

Brand	Coleman
Model	TH4B4223S
Category	Heat Pump
Language	English