Collomix Aqix Operating Instructions

Control elements
Intended use
 Display
 Key eld
3 Baery compartment
4 Connecon thread 3/4“ for hose coupling
5 Sieve insert
6 Retaining bracket
7 Water outlet
8 Storage tank for quanty 1
9 Storage tank for quanty 2
 Manual dosing / zeroing
 Seng the quanty + /-
 Start buon / pause

 :     


Store these instructions for the future.
         
the operating instructions and the applicable regulations

For safety reasons, children and adolescents under the age
of 16 as well as persons who have not familiarised them-
selves with this operang manual may not use this product.
Persons with restricted physical or mental abilies may
only use the product if supervised or instructed by a com-
petent person.
Children must be supervised in order to ensure that they
do not play with the product.
Never use the device if you are red or ill or under the in-
uence of alcohol, drugs or medicaon.

Do not use in freezing condions. Freezing water will de-
stroy the device.
Only connect the supply hose to the provided connecon,
not to the water outlet!
Only intended to be used with the suitable hose couplings
with ¾“ thread.
Avoid tensile loads: Do not pull at the connected hose.
The Collomix AQiX water dosing system is intended for use
by professionals or trained personnel on construcon sites
for the precise addion of water for mixing building chem-
ical products (such as mortar, plaster, screed, concrete, ll-
ers and the like).
It is used to precisely meter amounts of water.
The water dosing system may only be used with clear fresh-
water at a water temperature of up to 40°C.
The Collomix AQiX water dosing system is not designed for
industrial use.
It is not permied to use the meter with salt water, chem-
icals, foodstus, spirits, highly ammable and explosive
substances as well as compressed air. Using these sub-
stances may destroy the device.
The operang temperature must be between +5°C and
+50°C. Do not expose the device to direct sunlight for
longer periods of me.
The water pressure in the line must be between at least 2
and a maximum of 6 bar so that the device works awlessly.
You have purchased the new AQiX water dosing system.
Please note that this is a meter and it should be handled
with care. These instrucons contain important and useful
informaon for how you should use the device. Please read
the instrucons carefully.
The numbers in the text relate to the overview on page 2.
Technical data
Measurable water quanty: 0.3 - 99 litres
Min. / max. operang pressure 2 - 6 bar
Device operang temperature + 5°C - + 50°C
Flow medium Clear freshwater
Flow speed 40 ltr./min (at 6 bar)
Max. water temperature + 40°C
Accuracy 0.05 litre* (0.3 - 10 l)
from 10 l ± 1%
IP protecon class IP 64
Baeries 2 x AA/IEC LR6 1.5 V
Weight 688 grammes

Collomix Aqix Specifications

General

Brand	Collomix
Model	Aqix
Category	Measuring Instruments
Language	English